Copy all "n2p" files to your Nebula "Programs" folder and copy all "n2v" files to your "Vectors" folder.

Return To Index

The Programs

N-10-7T3 CLASSIC CONSOLE FOR NEBULA PRO consists of 20 Programs: You will find these under "CDS/7T3". Go to the Sub-Category "CON" to choose this collection of classic "console" programs

Programs are sampled at 96kHz and are tested to retain accuracy at 44.1kHz and 48kHz sample rates with the latest version of Nebula Pro. They are designed to be used with the 'Reverb' instance of Nebula Pro.

A note about setting levels

Many people have questions about the best way to set up their audio files, DAW tracks, buss groups, or Nebula Pro plug-in and program libraries as it pertains to volume levels.

I will cover this topic more in depth in a blog, video, tutorial, and eBook time permitting.
What you need to know for now pertains to this collection and to other libraries created by CDS.

Because programs like this collection, often classified as "preamp" programs in NebPro, focus around the ability to recreate a very wide dynamic range from the original hardware device, you are able to choose your level-setting options however you wish, and you are still recreating the same levels from the hardware emulated.

This means that if you wish to process all of your files by normalizing them to a certain maximum or averaged volume, you may do so. If you wish to leave files at whatever levels they are recorded and set levels using DAW track faders, you can do so. If you wish to calibrated your DAW levels based upon a VU level based on an RMS, like -18dB=0 dBFS, or 0dB VU, or a -20dB, -24dB, -12dB weighting or any other setting, you will get the same analog response from the program you run inside NebPro.

The analog nature of these programs is not just based around the dynamic range and best average, min,. or max. level setting, but on the variants that are involved in analog that do not exist in digital. Specifically, this is in regards to "lighter" lower level settings versus pushing the gain "into the red". The point is that analog tends to get a little more interesting, non-linear, and even driven or distorted, when pushed beyond a certain point.

If you place all attention in setting averaged levels to match a monitoring calibration, you may not be fully aware of the capabilities in coloring your sound intentionally, even subtly, by pushing levels a little harder. For this purpose, it is helpful for you to also know that my programs are edited to a max peak=real digital 0dB, meaning that you can take your files and push them all the way to 0dB digital and you are going into the most pleasant coloration of the analog signal without going over. So, no matter how you wish to run your files, levels, programs, you can choose to set low levels, averaged levels, or prevent from peaks going over, and you will get the same natural reaction from the NebPro programs from CDS.

N-10-7T3-BUSS

This program provides you with the Buss group section of the original British console.
Use this program in your DAW's Buss groups to mimic the response of the real analog console.
This program contains the Console's harmonic distortion in addition to the realism of the frequency spectrum.

7T3-BUSS CLEAN

This is the same as above without any harmonic distortion.

N-10-7T3-MAINS

This program provides you with the Main outputs of the original British console.
Use this program in your DAW's Main Outs to mimic the response of the real analog console.
This program contains the Console's harmonic distortion in addition to the realism of the frequency spectrum.

7T3-MAINS CLEAN

This is the same as above without any harmonic distortion.

N-107T3-C1LEQIN

This program provides you with the full signal path of a channel from the original British console.
This program provides the use of the channel's line input with the EQ circuit engaged. Use this program on your DAW's individual tracks to mimic the response of the real analog console.
This program contains the Console's harmonic distortion in addition to the realism of the frequency spectrum.

7T3C1LEQIN CLEAN

This is the same as above without any harmonic distortion.

N-107T3-C1-MEQIN

This program provides you with the full signal path of a channel from the original British console.
This program provides the use of the channel's microphone input with the EQ circuit engaged. Use this program in your DAW's individual tracks to mimic the response of the real analog console.
This program contains the Console's harmonic distortion in addition to the realism of the frequency spectrum.

7T3C1MEQIN CLEAN

This is the same as above without any harmonic distortion.

N-107T3C1LEQOUT

This program provides you with the full signal path of a channel from the original British console.
This program provides the use of the channel's line input with the EQ circuit bypassed. Use this program in your DAW's individual tracks to mimic the response of the real analog console.
This program contains the Console's harmonic distortion in addition to the realism of the frequency spectrum.

7T3C1LEQOUT CLEAN

This is the same as above without any harmonic distortion.

N-107T3C1MEQOUT

This program provides you with the full signal path of a channel from the original British console.
This program provides the use of the channel's microphone input with the EQ circuit bypassed. Use this program in your DAW's individual tracks to mimic the response of the real analog console.
This program contains the Console's harmonic distortion in addition to the realism of the frequency spectrum.

7T3C1MEQOUT CLN

This is the same as above without any harmonic distortion.

N-10-7T3C2LEQIN

This program provides you with the full signal path of a second channel from the original British console.
This program provides the use of the channel's line input with the EQ circuit engaged. Use this program in your DAW's individual tracks to mimic the response of the real analog console.
This program contains the Console's harmonic distortion in addition to the realism of the frequency spectrum.

T3C2LEQIN CLEAN

This is the same as above without any harmonic distortion.

N-107T3C2LEQOUT

This program provides you with the full signal path of a second channel from the original British console.
This program provides the use of the channel's line input with the EQ circuit bypassed. Use this program in your DAW's individual tracks to mimic the response of the real analog console.
This program contains the Console's harmonic distortion in addition to the realism of the frequency spectrum.

7T3C2LEQOUT CLN

This is the same as above without any harmonic distortion.

N-107T3C2MEQIN

This program provides you with the full signal path of a second channel from the original British console.
This program provides the use of the channel's microphone input with the EQ circuit engaged. Use this program in your DAW's individual tracks to mimic the response of the real analog console.
This program contains the Console's harmonic distortion in addition to the realism of the frequency spectrum.

7T3C2MEQIN CLEAN

This is the same as above without any harmonic distortion.

N-107T3C2MEQOUT

This program provides you with the full signal path of a second channel from the original British console.
This program provides the use of the channel's microphone input with the EQ circuit bypassed. Use this program in your DAW's individual tracks to mimic the response of the real analog console.
This program contains the Console's harmonic distortion in addition to the realism of the frequency spectrum.

7T3C2MEQOUT CLN

This is the same as above without any harmonic distortion.

Return To Index

About The Hardware

About the N-10-7T3 Classic Console FOR NEBULA PRO

The N-10-7T3 Classic Console is a first generation mixing desk that represents the first of the world's most famous, classic British desk series. The 1073, 1081, and 1084 console eq sections were made famous first by the original Wessex A88 console that this collection is inspired by. Two independent original channels from the console are emulated here, along with the console's buss groups and main outs.